qiao@hvtest.cc15871365102
  • Model Technical Agreement for the Procurement of Microprocessor-Based Relay Test Sets in Power Grid Technical Transformation Projects

    Recently, many power construction units and power supply companies have been making annual equipment procurement plans, among which microcomputer relay testers are in high demand among high-voltage testing equipment. This article summarizes the practical experience of microcomputer relay testers in procurement selection, delivery acceptance, and post maintenance, for reference by various units.


    6 Phase Relay Tester


    1、 Several parameters that need to be confirmed for procurement selection

    Before purchasing a microcomputer relay tester, the technical department should first clarify the actual usage needs of the unit and focus on confirming the following parameters to avoid being unable to use or having insufficient performance when purchased.

    1. Voltage level matching: Select the range of the microcomputer relay tester based on the highest voltage level of the equipment under the jurisdiction of this unit. The specifications required for the 10kV distribution network and 110kV substation are completely different.

    2. Accuracy level requirements: Determine the required accuracy level by comparing it with relevant GB/T or DL/T standards. The higher the accuracy, the higher the price, and it is sufficient.

    3. Usage scenario: If the frequency of outdoor use is high, it is recommended to choose a model with a dust-proof and waterproof shell, but it is not necessary for indoor fixed use.


    2、 Acceptance of microcomputer relay tester upon arrival

    After the equipment arrives, it should be jointly inspected by the technical specialist and the user team. Only after passing the inspection can it be stored or put into use.

    1. Appearance inspection: Check whether the shell is damaged or deformed, whether the display screen is cracked, and whether the interfaces and button functions are normal.

    2. Random data: Check whether the factory inspection report, certificate of conformity, operation manual, and calibration certificate are complete.

    3. Power on test: Conduct a no-load power on test according to the operation manual to confirm that all displays and functions are normal.


    3、 Price range and budget reference

    The price of microcomputer relay testers varies greatly due to differences in brand, range, and accuracy. The following is a rough estimate of recent market inquiries for budget preparation reference.

    1. Economic type: suitable for daily testing of 10kV distribution equipment, with functions that meet basic needs and relatively low prices.

    2. Standard type: covering voltage levels from 35kV to 110kV, with data storage and communication functions, it is the most commonly purchased specification by power supply companies.

    3. High precision type: used for metrological verification and precision measurement, with a high accuracy level and a price usually more than twice that of the standard type.


    4、 The difference and selection between high-voltage cable fault tester and high-voltage cable fault tester

    Many units may struggle with how to choose between microcomputer relay testers and high-voltage cable fault testers when purchasing. In fact, the two have different applications and cannot be replaced by each other.

    1. Functional differences: Microcomputer relay testers focus on voltage and insulation testing, while high-voltage cable fault testers are used for measuring other types of electrical parameters, with different testing objects and purposes.

    2. Configuration suggestion: Maintenance units for substations of 110kV and above recommend equipping both units, while 10kV distribution operation and maintenance units can choose according to actual testing items.


    5、 Post maintenance costs

    The procurement cost is only a part of the total cost of ownership, and the expenses for later calibration, maintenance, replacement, and consumables also need to be included in the budget.

    1. Annual calibration fee: Each unit sent to the metrology institute for calibration ranges from several hundred yuan to a thousand yuan, depending on the equipment type and calibration project.

    2. Replacement of vulnerable parts: Measurement cables and probes are vulnerable parts that need to be replaced once every 1 to 2 years on average.


    FAQ

    Q1: How long is the warranty period for microcomputer relay testers?

    A1: Most manufacturers offer a 1 to 2-year warranty, while some brands support paid extensions up to 3 years. Suggest specifying the warranty clause in the procurement contract.

    Q2: Do I need to go through bidding for the purchase of microcomputer relay testers?

    A2: State owned enterprises generally need to go through the bidding process, and the specific amount threshold is implemented according to the procurement management system of each unit.

    Q3: How long is the delivery time for Wuhan UHV microcomputer relay tester?

    A3: Regular models usually take 7 to 15 working days to ship, while customized specifications may take 20 to 30 working days.

    당신도 좋아할 수도 있습니다

    • 질문이 있으세요!

      언제든지 주저하지 말고 연락주세요
      문의하기
    • 우리를 방문하세요

      6호관, Optics Valley 광학-기계 산업 단지, 84 Gaoxin 5 Road,
      중국 후베이성 ​​우한시 이스트 레이크 신기술 개발구

    • 이메일을 보내주세요

      qiao@hvtest.cc

    • 전화주세요

      +86-15871365102