Product introduction
The Battery Charge and Discharge Tester is a specialized testing device used for detecting, evaluating, and maintaining battery performance. By performing controlled charging, constant-current discharging, capacity testing, cycle testing, and data logging on batteries, it determines the actual capacity, state of health (SOH), remaining service life, and whether there are any performance degradation issues.
 |  |
Product functions
1. Battery capacity testing (core function)
By setting the discharge current and allowing the battery to discharge under specified conditions, the following parameters are recorded simultaneously:
Discharge voltage variation
방전 전류
Discharge time
Output capacity (Ah)
Output energy (Wh)
2. Battery charge-discharge cycle testing
The equipment can automatically execute:
Charge → Discharge → Recharge → Redischarge
Cycle testing for battery life evaluation.
Primarily used for:
New battery life verification
Battery consistency analysis
Aging testing
R&D testing
3. Battery maintenance and activation
For long-term standby batteries (e.g., UPS, power system batteries), prolonged floating charging may lead to:
Capacity degradation
Imbalance among individual cells
Plate sulfation
기술적인 매개변수
기술적인 매개변수
| 작업 모드 | 단독으로 사용 가능, 동시에 사용 가능, 원격 제어 및 상태 모니터링 가능 | |||
| Applicable battery | 48V | 110V | 220V | 380V |
| 충전 전압 | 40～60V | 95～150V | 190～300V | 350～450V |
| 충전 전류 | 10～150A | 1～80A | 1～40A | 1～20A |
| 방전 전압 | 10～60V | 80～135V | 80～270V | 300～460V |
| 방전 전류 | 0～150A | 0～200A | 0～100A | 0～60A |
| 현재의 정확도 | 1% | |||
| 전압 정확도 | 0.5% | |||
| 모노머 전압 정확도 | 0.2% | |||
| 모노머 전압 | 0.500V～16.00V(resolution 1mv) | |||
| 충전 방전 시간 | 0 ~ 99시간 59분 | |||
| 전원공급장치 | 교류:220V/380V | |||
| 냉각 방식 | 강제 공랭 | |||
| 취급방법 | industrial universal wheel | |||
업무 환경
| 열 방출 | 강제 공랭 |
| 온도 | working range: -5 ~ 50℃ storage temperature: -40 ~ 70℃ |
| 습기 | relative to humidity0 ~ 90% (40±2℃) |
| 고도 | 정격 고도: 4000m |
| 소음 | ﹤60dB |
작동 전원 공급 장치
| 전압 | 단상 3선식 : 220V AC (- 20% ~ +30%), 주파수 : 45 ~ 65Hz |
| 내전압 시험 | 입력 - 하우징: 2200V DC 1분 |
| 입출력: 2200V DC 1분 | |
| 출력 - 하우징: 700V DC 1분 | |
| 보안 | EN610950을 충족 |
배선
| AC 입력 | Gb socket, suitable for 1 ~ 1.5mm2케이블 |
| DC 출력 | instrument 25 mm2Cable quick connect plug (red positive black negative) |
별명: 배터리 충전 방전 테스터; 배터리 충전 테스터
특징
1. 완벽한 기능과 다목적 기능을 갖춘 충전, 방전, 단일 장치 감지, 온라인 모니터링 및 활성화의 5-in-1 통합;
2. 단일 셀 전압 무선 모니터링 기능, 각 무선 모니터링 모듈은 동시에 12개의 단량체를 모니터링할 수 있습니다.
3. 원격 제어 방전 기능을 갖춘 중국 배경 분석 소프트웨어;
4. The host has a USB interface and a 2G large-capacity internal data storage space;
5. 테스트의 안전성, 신뢰성 및 정확성을 보장하기 위해 듀얼 CPU를 사용하여 함께 작동합니다.
6. 방전 테스트를 종료하지 않고 방전 과정 중에 일시 중지 및 매개 변수 수정을 수행할 수 있습니다.
Application Scenarios
Substations
Testing the capacity and state of health (SOH) of DC screen battery banks
Used for periodic battery maintenance and acceptance testing
Power plants
Testing the performance of backup power batteries at power stations
Ensuring reliable power supply during emergency situations
Telecom base stations / communication rooms
Testing the capacity of communication backup batteries
Ensuring operation of communication equipment during power outages
Data centers / UPS rooms
Testing the discharge capability of UPS battery banks
Preventing backup power failure
New energy storage power stations
Testing the performance of energy storage battery clusters
Used for lithium battery capacity and cycle life testing
Battery manufacturers
Used for factory testing of cells, battery modules, and PACKs
Performing charge-discharge cycle testing
New energy vehicle industry
Testing the performance and degradation of power batteries
Used for battery maintenance and R&D analysis
Research institutions / laboratories
Used for new battery R&D and performance research
FAQs
큐: What i에스a Battery Charge and Discharge Tester?
A: A Battery Charge and Discharge Tester is a testing device used to evaluate the charging and discharging performance and capacity status of batteries. It can assess battery health, remaining capacity, and service life.
Q: What types of batteries is this device suitable for?
A: It is suitable for:
Lead-acid batteries
Valve-regulated lead-acid batteries (VRLA)
UPS batteries
Lithium iron phosphate (LiFePO₄) batteries
Ternary lithium batteries
Energy storage battery packs, and more.
Q: Why is battery charge-discharge testing necessary?
A: Through testing, it is possible to:
Determine whether the actual battery capacity meets the specified standards
Identify batteries with capacity degradation
Prevent backup power failures in advance
Extend battery service life
Improve the reliability of the power supply system
Q: What is the difference between a battery charge-discharge tester and an ordinary battery charger?
A: An ordinary battery charger can only charge the battery, while a battery charge-discharge tester can:
Perform active discharge testing
Measure capacity
Record data
Analyze battery performance
