Product Introduction
CT/PT TESTER is mainly used for field testing of P class CT and PT. The test items mainly include excitation characteristic, transformation ratio, polarity, Degauss, 5％ and 10％ error curves, secondary circuit check, withstand test of power frequency alternating current and secondary load. Adopt LCD, self-equipped minitype printer supporting field printing; supporting to use USB flash disk to dump data, with simple and convenient operation.
매개변수
일하는 힘 | AC220V±10% ,50Hz | |
장비 출력 | 0~1200V 5kVA 최대 설정값 20A | |
고전류 출력 | 0-600A | |
여기 측정 정확도 | ≤0.5%(0.2%*판독값+0.3%*범위) | |
2차 권선 저항 측정 | 범위 | 0.1~300Ω |
정확성 | ≤ 1.0%(0.4% * 판독값+0.6% * 범위) | |
2차 실부하 측정 | 범위 | 5~500VA |
정확성 | ≤ 0.5%(0.2% * 판독값+0.3% * 범위) ± 0.1VA | |
위상 측정(각도차) | 범위 | 1~99.9분 |
해결 | 0.1분 | |
CT 권선비 측정 | 범위 | ≤25000A/5A(5000A/1A) |
정확성 | ≤ 0.5%(0.2% * 판독값+0.3% * 범위) | |
CT 권선비 측정 | 범위 | ≤500kV |
정확성 | ≤ 0.5%(0.2% * 판독값+0.3% * 범위) | |
작동 온도 | -10℃ ~ 40℃ | |
작동 습도 | ≤90% | |
크기 | 410mm × 260mm × 340mm | |
호스트 가중치 | 25kg | |
특징:
1. Support detection of CT and PT
2. Meet the requirements of GB1207, GB1208 and other regulations
3. Without connecting other auxiliary equipment, a single machine can complete all the test items, complete the excitation and transformer specific polarity tests at the same time, and test the transformer bushing CT
4. Self-equipped micro fast printer, which can directly print test results on site
5. Easy to operate, with intelligent prompt, making it easier for users to operate
6. Large screen LCD, graphical display interface
7. Automatically give CT/PT (excitation) inflection point value according to regulations
8. Automatically give 5% and 10% error curves
9. 3000 sets of test data can be saved without loss after power failure
10. Support USB flash disk transfer data, which can be read through standard PC and generate WORD report
작고 가벼우며 22kg 이하로 현장 테스트에 매우 편리합니다.
