qiao@hvtest.cc15871365102
  • SMG7000 Handheld Power Quality Analyzer

    SMG7000 Handheld Power Quality Analyzer is a special portable product for the inspection and analysis of power grid operation quality. High-precision test instrument specially used to detect power quality problems such as waveform distortion, harmonic content and three-phase imbalance in power grid; At the same time, it also has the function of electrical parameter testing and vector analysis.

    Product Details of SMG7000 Handheld Power Quality Analyzer



    Product Introduction

    Wuhan UHV Power Technology Co.,Ltd., is a professional manufacturer and supplier of high-voltage power testing equipment in China.Portable Three-Phase Power Quality Analyzer is a professional testing instrument used for on-site detection and recording of the operating status of three-phase AC power systems. It is commonly used for fault diagnosis in industrial power distribution, substations, data centers, photovoltaic/energy storage systems, UPS, and large electromechanical equipment.

    HTY_8352HTY_8500HTY_8502

    Product functions

    1. Comprehensive power quality analysis

    The SMG7000 is primarily used to detect various power quality issues that occur during power grid operation, including:

    • Voltage deviation

    • Frequency deviation

    • Voltage fluctuation

    • Flicker

    • Harmonic content

    • Three-phase voltage imbalance

    • Voltage and current waveform distortion

    In other words, it can not only measure voltage and current, but also further determine whether there are abnormalities in power quality of the grid.

    2. Electrical parameter measurement

    The device can simultaneously measure and analyze multiple basic electrical parameters, including:

    • 전압

    • 현재의

    • 유효전력

    • 반응성

    • 피상전력

    • Power factor

    • 빈도

    • Phase angle

    The voltage measurement range is 0–200–800 V with automatic range switching, and the frequency measurement range is 45–55 Hz. Current is measured using clamp-on current transformers, with different range clamp-on transformers available as needed.

    Product parameters

    입력특성

    전압 측정 범위

    0200V800V, 자동절단기어

    전류 측정 범위

    클램프 변압기(3가지 유형)

    5A/25A(표준)

    100A / 500A(옵션)

    400A / 2000A(옵션)

    위상각 측정 범위

    0 ~ 359.99 °

    주파수 측정 범위

    45~55Hz

    전압 채널

    3채널(U안에안에)

    현재 채널

    3채널(나는)

    최대 고조파 분석 시간

    63번.

     

    1분 간격 최대 연속 저장 기간

    18개월

    정확성

     

    전기적 매개변수 측정 섹션

    전압

    ± 0.2%

     

    빈도

    ±0.01Hz

    전류, 전력

     ± 0.5%

    단계

    ± 0.2 °

    전력 품질 섹션:

     

    기본 전압 허용 오차

     0.5% 이하

    기본 전류 허용 오차

    1% 이하 FS

    기본 전압과 전류 측정 오류 사이의 위상

    ≤0.2 °

    고조파 전압 측정 오류 비율

    ≤0.1%

    고조파 전류 측정 오류 비율

    ≤0.2%

     

    삼상 전압 불균형 오류

    ≤0.2%

     

    전압 편차 오류

    ≤0.2%

     

    전압 변동 오류

     ≤0.2%

     

    작동 온도

    -10 ℃ ~ + 40 ℃

    충전 전력

    220V AC, 45Hz-55Hz 주파수

    호스트 전원

    3VA 이하

    배터리 최대 작동 시간

    10시간 이하

    단열재

    1) 전압, 전류 입력 단자와 하우징 사이의 절연 저항은 100MΩ 이하입니다.

    2) 작동 전원 입력 및 쉘의 전원 주파수로 1.5KV(유효값)를 견디며 1분간 지속됩니다.

    크기

    258mm × 158mm × 58mm

    무게

    1.8Kg

    별명휴대용 전력 품질 테스터전력 품질 테스터전력 품질 측정기전력 품질 분석기


    특징:

    1. 계측기는 그리드 파형 왜곡 발생, 고조파 함량, 전압 변동 및 깜박임 및 전력 품질 문제의 위상 불균형을 감지하는 고정밀 테스트 장비로 설계되었습니다. 또한 전기 매개변수 테스트, 벡터 분석 기능도 포함됩니다.

    2. 전압, 전류, 유효전력, 무효전력, 위상각, 역률, 주파수 등과 같은 다양한 전기적 매개변수를 정확하게 측정할 수 있습니다.

    3. 계측 장치 배선이 올바른지 여부를 사용자가 판단할 수 있도록 분석하여 측정된 전압 및 전류의 벡터 다이어그램을 표시할 수 있습니다.

    4. 전류는 클램프 변압기를 사용하여 측정됩니다. 전류 루프를 연결하지 않고도 클램프 변류기를 사용하므로 쉽고 안전하게 측정을 수행할 수 있습니다. 사용자의 측정 범위에 따라 다양한 범위의 클램프를 장착할 수 있습니다.

    5. 유틸리티 그리드에서 클라이언트까지의 AC 전력 품질 측정 및 분석을 쉽게 수행할 수 있습니다. 측정 및 분석: 주파수 편차, 전압 편차, 전압 변동, 깜박임, 3상 전압 불균형 요인 및 고조파.

    6. 단상 전압, 전류 파형을 표시할 수 있으며, 3상 전압 및 전류 파형을 동시에 표시할 수 있습니다.

    7. 모든 테스트 인터페이스에는 화면 잠금 기능이 있어 사용자 데이터를 쉽게 읽고 분석할 수 있습니다.

    8. 부하 변동 모니터링: 다양한 작동 조건에서 다양한 전기 장비로 인해 발생하는 유틸리티 그리드 전력 품질의 변동을 측정하고 분석할 수 있습니다. 전압, 전류, 유효전력, 무효전력, 피상전력, 주파수, 위상 등 전기적 변수의 추이를 정기적으로 기록하고 저장합니다.

    9. 작동 중 전기 장비 조정 및 동적 모니터링을 수행할 수 있으며 사용자가 전력 조정 및 시운전 프로세스 문제를 해결하는 데 도움이 됩니다.

    10. 전력 시스템의 무효 전력 보상 및 필터링 장치의 동적 매개변수를 측정 및 분석하고 기능 및 기술 사양을 정량적으로 평가할 수 있습니다.

    11. 사용자는 서로 다른 저장 간격을 설정할 수 있으며, 설정된 시간 간격에 따라 데이터가 연속적으로 저장됩니다.

    12. 내부에는 대용량 데이터 저장 장치가 장착되어 있습니다. 1분 간격으로 연속 18개월 이상을 저장할 수 있어 장기 모니터링 테스트 지점의 요구 사항을 충족합니다.

    13. 장비에는 USB 커넥터가 포함되어 있어 데이터를 무대 뒤 관리 컴퓨터에 직접 복사하는 데 쉽게 사용할 수 있습니다.

    14. 강력한 데이터 관리 소프트웨어와 협력하고 실시간 샘플링 데이터를 백스테이지 관리 컴퓨팅에 직접 업로드할 수 있어 백그라운드에서 보다 포괄적이고 신속한 처리를 수행할 수 있습니다.

    15. 날짜와 시간을 실시간으로 표시할 수 있는 달력, 시계 기능이 있습니다. 테스트 데이터 및 결과를 저장하면서 현장에서 감지하고 직렬 커넥터를 통해 컴퓨터에 업로드한 후 강력한 보고 기능을 갖춘 무대 뒤 관리 소프트웨어(옵션)를 통해 컴퓨터화된 데이터 관리를 실현할 수 있습니다.

    16. 대형 스크린 수입 컬러 LCD가 디스플레이로 사용되며 중국어 사용자 인터페이스에는 한자 프롬프트, 다중 매개변수 디스플레이 LCD 인터페이스, 친숙한 대화형 인터페이스가 장착되어 있습니다.

    17. 배터리 수명을 최대화하기 위해 3분 동안 조작하지 않으면 LCD가 자동으로 절전 모드로 전환됩니다.

    18. 전도성 실리콘 키패드를 사용하여 촉감이 좋고, 수명이 길고, 디자인이 합리적이며, 조작이 쉽습니다.

    19. 대용량, 고성능 리튬이온 충전지가 내장되어 있어 배터리를 완충하면 10시간 이상 연속 사용이 가능합니다.

    20. 크기가 작고, 무게가 가벼워서 휴대가 간편합니다. 현장 테스트 측정과 실험실의 표준 측정 장비로 모두 사용할 수 있습니다.


    Application Scenarios

    Industrial factories: Troubleshoot equipment shutdowns, PLC resets, frequency converter alarms, and other issues.

    Power distribution systems: Detect three-phase voltage, current, power, power factor, and load conditions.

    Power quality diagnostics: Analyze voltage sags, swells, interruptions, harmonics, flicker, and transients.

    Motors and variable frequency drives (VFDs): Detect inrush current, three-phase imbalance, and harmonics.

    UPS and data centers: Monitor input/output power quality and abnormal events.

    Photovoltaic, energy storage, and EV charging: Test grid-connected power quality of inverters, power conversion systems (PCS), and charging equipment.

    Building and energy management: Conduct load surveys, energy consumption analysis, and energy saving assessments.


    FAQ about Handheld Power Quality Analyzer

    Q: Can the SMG7000 measure voltage and current simultaneously?

    A: The SMG7000 is equipped with 3 voltage channels and 3 current channels, allowing simultaneous acquisition of three-phase voltage and three-phase current data, as well as comprehensive analysis of parameters such as power, power factor, and phase angle.Q: Can the SMG7000 detect abnormal current waveforms?

    A: Yes. The device can capture current waveforms and, combined with harmonic analysis, determine whether there are issues such as waveform distortion or excessively high harmonic content, helping to analyze the impact of nonlinear loads on the power grid.

    Q: Why choose our company's portable three-phase power quality analyzer?

    A: We have our own factory with over 10 years of production experience.Choosing our portable three-phase power quality analyzer not only meets conventional power quality testing requirements such as voltage, current, power, power factor, frequency, harmonics, and three-phase imbalance, but also offers advantages including portability, high accuracy, multi-functionality, data recording, and on-site analysis capabilities.








    당신도 좋아할 수도 있습니다

    • 질문이 있으세요!

      언제든지 주저하지 말고 연락주세요
      문의하기
    • 우리를 방문하세요

      6호관, Optics Valley 광학-기계 산업 단지, 84 Gaoxin 5 Road,
      중국 후베이성 ​​우한시 이스트 레이크 신기술 개발구

    • 이메일을 보내주세요

      qiao@hvtest.cc

    • 전화주세요

      +86-15871365102